I'd ask for the diagnosis to name the source in one of four buckets, with evidence for that bucket — not just "damp found."
- Rising damp: tide mark, salts, readings highest near the floor and falling with height, ground level or a failed/breached damp-proof course. Ask what was checked outside, not just inside.
- Penetrating damp: localised to a wall facing wind-driven rain, a leaking gutter/downpipe, cracked render or a failed seal around a window. It should get worse after rain and line up with a specific external defect.
- Condensation: cold surfaces, poor ventilation, high indoor humidity, mould in corners and behind furniture. Moisture readings alone don't prove this — ask for humidity/ventilation notes and whether heating and extractor fans are working.
- A leak: plumbing, a roof or a waste pipe. That needs tracing, not a damp-proofing treatment.
Two red flags for me: a diagnosis based on one surface meter reading, with no readings at different heights or in a dry comparison area, and a quote that prices the treatment before the source is fixed. A good scope should read in order: fix the source, allow drying time, then reinstate plaster/paint — and say how you'll know it worked, with a re-check after rain or after a few weeks, not just a fresh coat of paint on the day.