nspirephotocheck
Member
Walked a unit last week where every smoke alarm passed the button test. Then I checked the manufacture dates on the back: two of the four were past 10 years. A beep tells you the horn works. It doesn't tell you the sensor is still in service — alarms are rated for 10 years, and after that they're supposed to be replaced, battery or not.
That's the fail that hides in plain sight. The alarm looks fine, the tenant hears the beep, and the inspector still flags it. On our walks now, the date check is part of the alarm check: press the button, then read the date. If it's past 10 years, it goes on the fix list before the inspection, not after.
Do you check manufacture dates on your walks, or just the button test?
That's the fail that hides in plain sight. The alarm looks fine, the tenant hears the beep, and the inspector still flags it. On our walks now, the date check is part of the alarm check: press the button, then read the date. If it's past 10 years, it goes on the fix list before the inspection, not after.
Do you check manufacture dates on your walks, or just the button test?